Transducers and Transmitters
Selecting the right transducer for your application is crucial to measurement accuracy. Any field data collected are only as good as the transducer used for measurement. Available in a variety of options, there is a shock pulse or vibration transducer for every need.
Transducers
Shock pulse transducers
Shock pulse transducers are used in all permanent SPM installations for bearing monitoring. They are installed in countersunk mounting holes on the bearing housings. A shock pulse transducer converts the shock pulses emitted by the bearing into electric signals. SPM supplies different versions of shock pulse transducers with several adapters and tools for installations anywhere.
The standard SPM shock pulse transducer is the 40000. For applications requiring cable lengths exceeding 4 meters between transducer and measuring unit, use the 42000 version, where the signal is stabilized for transmission across cables up to 100 metres long.
Vibration transducers
The SOLID transducers are piezo-electric accelerometers of compression type, each individually tuned. Enhanced electronics and improved ambient characteristics deliver excellent performance in a very large area of applications.
The SOLID transducers and transmitters are designed to withstand the rigors of industrial environments. Stainless, acid proof steel housings, case isolation and hermetic sealing make them very robust.
See the technical data sheets for more information.
Transmitters
The SOLID transmitters provide a 4-20 mA output signal proportional to the vibration velocity, across its frequency range. The output signal can be transmitted to common process control systems like PLC, DCS and SCADA. The transmitters operate using power from any standard 4-20 mA loop. No additional power is necessary.
Features of the transmitters are unique micro controller design and calibration data stored in the sensor. The measuring range is 0 - 25 mm/s and the frequency range 2-1000 Hz.
For more information, see the technical data sheets.
The SOLID transducers and transmitters all come with top connector for fast and easy installation. A special SOLID transducer with side connector is also available for use in rough industrial environments where moist and water may cause equipment problems.
Safety and Security
Connectors
The SOLID line of transducers is completed with a range of brand new, composite material connectors for TNC, 2-pin and SMB cables. Benefits such as corrosion resistance, vibration dampening and weight reduction make this design far superior to metal connectors.
Secure Installation
To further secure the installation, we supply twisted pair cables and uncovered, acid proof stainless steel conduits. These are protective covers slipped onto the cable and fixed to the transducer at the connector. Stainless steel cable clips are available for holding the conduit. For protection of cable joints from moist and water, a stainless, acid proof steel service box is available.
For more information, see TD sheet.
EX Versions
Shock pulse and SOLID transducers, transmitters and connectors are also available in EX versions, approved under the ATEX directive, for use in potentially explosive atmosphere.
The functionality and performance of the EX proof products are identical to that of their base model counterparts.
See the technical specifications here.